B+B SmartWorx RS-232 to RS-422 Converter - 4000 ft Maximum Operating Distance 422LCOR
422LCOR | B&b Smartworx®
New Listing!
Part Number: 422LCOR
Condition: New
In Stock:
Out of stock
Real time availability
Notify Me
Product Specifications
B+B SmartWorx RS-232 to RS-422 Converter - 4000 ft Maximum Operating Distance 422LCOR
REV 232/422CONV W/LED
Manufacturer Part Number: 422LCOR
MANUFACTURER NAME: B&b Smartworx
MANUFACTURER PART NUMBER: 422LCOR
UPC EAN CODE:
LANGUAGE: EN
MARKET:US
General Information: | |
Model BB-422LCOR, non-isolated serial converter, converts unbalanced RS-232 signals to balanced voltage digital interface with data rates up to 90K bits per second on cable lengths of 1200 meters (4000 ft). Ten receivers can be connected to any one driver for use in multi-drop systems. The RS-232 port is a female DB25 connector with pins 2 (TD input) and 3 (RD output) supported. Protective Ground (pin 1) and Signal Ground (pin 7) are also connected. The RS- 422 port is a male DB25 connector with Send Data outputs on pins 2 and 14, and Receive Data inputs on pins 5 and 17. Protective Ground (pin 1) and Signal Ground (pin 7) are connected through to the RS-232 connector. Interconnection of the converter with another RS-422 device: The polarity of the two RS-422 lines must be correct. With no data being sent, the RS-232 line should be negative and the RS-422 "A" terminal should be negative with respect to the "B" terminal. The wire recommended in the RS-422 Standard is number 24 AWG copper conductor, twisted-pair telephone cable with a shunt capacitance of 16 pF per foot. For long runs and/or high data rates, it is recommended that the wires be terminated with a resistor at the receive end. The twisted pair usually used has an impedance of about 100 Ohms, therefore a 100 Ohm resistor is normally used for termination. The RS-422 side of the converter requires more power as the transmission line is increased and termination resistor value is reduced, therefore it may be necessary to use a termination resistor that is larger than 100 Ohms. The RS-422 driver has the ability to drive ten RS-422 receivers connected in parallel. A system of multiple receivers may require some experimentation with location and size of termination resistors, line lengths, grounding, etc. | |
Manufacturer | Advantech Co., Ltd |
Manufacturer Part Number | 422LCOR |
Manufacturer Website Address | http://www.advantech.com |
Brand Name | B+B SmartWorx |
Product Model | BB-422LCOR |
Product Name | RS-232 to RS-422 Converter |
Product Type | Signal Converter |
Media & Performance: | |
Maximum Operating Distance | 4000 ft |
Power Description: | |
Input Voltage | 12 V DC |
Miscellaneous: | |
Environmentally Friendly | Yes |
Questions and Answers
Questions and Answers | Ask CompSource |
Shipping / Returns
Shipping
Ground =
$12.95
(Delivery within 2-7 business days)
Two Day Air = $25.00
(Delivery within 2 business days)
Standard One Day = $35.00
(Delivery within next business day)
Priority = $45.00
(Delivery within next business morning)
U.S Mail Priority (AA,AE,AP only) = $30.00
FedEx International Economy (Canada only) = $85.00
Typically out of stock items are filled within 1 to 14 business days but can and may take longer.
Shipping dates are best estimates based on product location and may vary with holidays.
If product requires trucking, additional fees may apply.
* Some destinations are subject to Applicable State/Duty Taxes
Returns
CompSource realizes that every product may have different return guidelines. Please see the policy below regarding this item.
This Product Has Limited Exchange Privileges.
Limited returns within 30 days of purchase permitted on this product.
For support on this product, please contact B&b Smartworx.
B&b Smartworx Company's Information
Click B&b Smartworx for all products
Product Reviews
Overall Rating | Write a Review
|
Best Sellers
More Best Sellers
Recently Viewed
About B&b Smartworx
In today's rapidly evolving technological landscape, businesses require robust solutions to stay connected, secure, and efficient. B&B SmartWorx, a leading provider of industrial networking and connectivity solutions, offers a comprehensive range of products designed to meet the diverse needs of industries such as manufacturing, transportation, utilities, and more.
Unlock the Power of B&B SmartWorx Technologies
B&B SmartWorx specializes in providing reliable and innovative solutions for industrial networking, connectivity, and IoT applications. Here are some key areas where their technologies excel:
1. Industrial Ethernet Switches
B&B SmartWorx offers a wide range of industrial-grade Ethernet switches designed to withstand harsh environments and ensure reliable connectivity in industrial settings. These switches provide features such as:
- Gigabit Ethernet: High-speed data transmission for demanding industrial applications.
- PoE (Power over Ethernet): Simplified installation and reduced cabling requirements by providing power and data over a single Ethernet cable.
- Managed and Unmanaged Options: Flexibility to choose between managed switches for advanced network management capabilities or unmanaged switches for plug-and-play simplicity.
2. Serial Connectivity Solutions
For legacy systems and equipment that rely on serial communication, B&B SmartWorx offers a variety of serial-to-Ethernet converters, serial servers, and serial cards. These solutions enable seamless integration of serial devices into modern Ethernet networks, facilitating:
- Legacy Equipment Integration: Extend the lifespan of legacy equipment by connecting them to modern networks.
- Remote Monitoring and Control: Enable remote monitoring and control of serial devices for enhanced efficiency and productivity.
3. Wireless Connectivity
B&B SmartWorx provides wireless networking solutions tailored for industrial applications, including:
- Industrial Wi-Fi Access Points: Reliable and secure wireless connectivity for industrial environments, enabling mobility and flexibility.
- Cellular Routers: Robust cellular connectivity solutions for remote monitoring, asset tracking, and IoT applications in challenging environments.
4. IoT Gateways and Edge Devices
As the Internet of Things (IoT) continues to revolutionize industries, B&B SmartWorx offers IoT gateways and edge devices that enable seamless integration of IoT devices into existing networks. These solutions provide:
- Data Aggregation and Analysis: Collect and process data from IoT sensors and devices at the network edge for real-time insights and decision-making.
- Interoperability: Support for various IoT protocols and standards, ensuring compatibility with a wide range of devices and systems.
Why Choose CompSource for Your B&B SmartWorx Purchases?
When it comes to purchasing B&B SmartWorx products, CompSource is your ultimate destination. Here's why:
1. Expertise and Knowledge
CompSource boasts extensive expertise and knowledge of B&B SmartWorx's product range and technologies. Their experienced team can provide valuable insights and recommendations to help you choose the right solutions for your specific requirements.
2. Competitive Pricing
CompSource offers competitive pricing on all B&B SmartWorx products, ensuring you get the best value for your investment. Their commitment to affordability means you can enhance your industrial networking infrastructure without exceeding your budget.
3. Exceptional Customer Service
Customer satisfaction is paramount at CompSource. Their dedicated support team is committed to providing exceptional service and assistance, from pre-purchase consultations to after-sales support. They prioritize a seamless and enjoyable shopping experience for every customer.
4. Fast and Reliable Shipping
CompSource ensures that your B&B SmartWorx products are delivered quickly and securely. With a variety of shipping options available, you can choose the one that best meets your timeline and budget needs.
5. Authorized Dealer Status
As an authorized dealer of B&B SmartWorx products, CompSource guarantees that all products are genuine and come with full manufacturer warranties. This provides peace of mind, knowing that your investment is protected and supported by official channels.
Please Check Out Some of the Most Popular B&b SmartWorx Categories We Offer
- Transceivers/Media Converters
- Hard Drives
- Switches & Bridges
- Miscellaneous Devices
- Switch Modules
- Computers
- Touchscreen Monitors
- Mounting Kits
- Connector Adapters
- Power Adapters
- Terminal & Device Servers
- Computer Cases
- Digital Signage Systems
- Cables
More on B&B SmartWorx
B&B SmartWorx's advanced networking and connectivity solutions empower businesses to achieve seamless connectivity, enhanced productivity, and improved efficiency in industrial environments. By choosing to purchase from CompSource, you benefit from their expertise, competitive pricing, exceptional customer service, fast shipping, and authorized dealer status. Discover the difference that B&B SmartWorx and CompSource can make for your industrial networking needs today!
You can chat with us or give our professionals a quick phone call at (800)-413-7361, we can assist with the best solution for your needs and budget.
I have already received my new electronic stapler and I must say, it is perfect. For the price and how quickly this item was shipped to me, I will definitely be ordering from your company again. Thanks very much! AnonymousMore Reviews